Cable sizing calculator

Electrisim
Load
System
V

Line-to-line for three-phase (e.g. 400 V), line-to-neutral for single-phase (e.g. 230 V).

Load given as
A
kW
Cable
m
Ω/km

Typically 0.07–0.09 Ω/km for low-voltage multicore cables.

%
Short circuit
kA

Maximum fault current at the start of the cable.

s

Time the protective device needs to clear that fault, up to 5 s.

Installation (for the current-carrying capacity)
Cable laid
°C

Reference: 30 °C in air, 20 °C in the ground.

Count each parallel cable as a circuit.

Recommended cable size

—

—

Check the inputs: positive values, disconnection time up to 5 s, ambient below the conductor limit.

Smallest size for the voltage drop limit
—
Smallest size for the short circuit
—
Voltage drop at the recommended size
—
Load current
—
Correction factor (temperature × grouping)
—
Required tabulated current-carrying capacity
—

Check that the cable’s tabulated current-carrying capacity for your installation method (IEC 60364-5-52 or the manufacturer’s datasheet) is at least the required value.

Free calculator by Electrisim · How it works